Unique 3D White, which leaves you more space of dyeing and imagination!
Ultra Translucent Zirconia Block
1. Ultra translucency with total light transmission rate >50% (comparable to lithium disilicate)
2. Average strength over 800 Mpa (can be used in a variety of all-ceramic restorations such as onlay/inlay, crown, bridge and so on)
3. Highly accurate Vita standard coloring liquid to meet the requirements of high standard dental restoration
4. Excellent machinability owing to unique shaping technique
5. Top quality medical-grade nanometer zirconia powder
6. Ok for Anterior + Posterior teeth
| layer |
Proportion |
Vickers
Hardness(HV)
|
Strength(MPa) |
Translucency |
| layer 1 |
20% |
≥1250 |
≥750 |
55%
↑
43%
|
| layer 2 |
20% |
≥1270 |
≥920 |
| layer 3 |
20% |
≥1290 |
≥950 |
| layer 4 |
20% |
≥1310 |
≥1000 |
| layer 5 |
20% |
≥1350 |
≥1100,≤1250 |
Features:
Unique Dyeing System
White but Translucent with Natural Gradient
Flexible Coloring to Make Teeth More Natural
Indications
XTCERA 3D White is intended for the fabrication and preparation of copings, full anatomical/ full
contour crowns, bridges up to three uints, inlays, and onlays for anterior restorations.
Note:Directing arrow is marked on the label of multilayer blanks, which points to insical surface.
Chemical Composition
| Component |
Content |
| ZrO2+HfO2 |
＞90.5wt% |
| Y2O3 |
9.28wt% |
| AL2O3 |
＜0.5wt% |
| Other Oxides |
＜0.5wt% |
Properties
| Projects |
Detection result |
| Sintering Density |
≥6.0g/cm³ |
| Bending Strength |
≥750MPa |
| Vickers Hardness |
1250HV |
| Chemical Solubility |
＜100μg/m² |
Product Tags:
|
|
Porcelain False Teeth Dental Zirconia Blank High Strength Cerec Zirconia Blocks Images
|
